Etherchannel and Trunk

[mstillante]

Good evening,

I'm trying to make and etherchannel working also as trunking between a router and a switch L3 but not successiding .

does anybody have any clue how this can be possible?

any documentation where i can find it out ?

what is the configuration i shoud follow ?

thks very much

/michelangelo

[Reza Sharifi]

Hi,

What type of router and switch are you using? What is the interface type? Are they all 1Gig, 10Gig, etc...

Can you provide more info about your setup?

HTH

[mstillante · Accepted solution]

hi i solved by myself ... thks anyway

[balaji.bandi]

Please provide below information :

1. what is the device models

2. what IOS running on it

3. what is the interface and prefer to show all the config.

router and a switch L3 but not successiding  - explain more

or check this what you looking :

http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/336-cisco-router-8021q-router-stick.html

[mstillante]

hi i solved by myself ... thks anyway

ps: the link you provided me was not helpful for my topic

[balaji.bandi]

thank you for the feedback - your orginal post  do not consists enough information, and we do not know what exactly you are doing what is not working.

I only given reference, this does not mean it will solve the issue.