etherchannel link selection

[rotran]

Hi all,

Question: By default, how does etherchannel decide which link it will use when sending/receiving ? I've bundled two 10g links (i am not load-balancing at the moment) and I'm trying to determine which link at any given time it will use because I understand it doesn't split the traffic equally. Any help would be appreciated.

Thanks

[massimiliano.serafino · Accepted solution]

Hi,

Look at http://www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a0080094714.shtml

Very interesting.

I hope this helps.

Best regards.

Massimiliano.

[rotran]

Very helpful - thank you