09-10-2008 06:04 AM - edited 03-06-2019 01:17 AM
My name is David,
Please I cant configure 2 TenGigabitethernet on Catalyst 4503, when I do that dont work the etherchannel I'm using interface Port-channel1, switchport on (global) and in the interfaces 10Giga the command .. switchport mode trunk and channel-group 1 mode on..... but the etherchannel dont work....please help me...thanks
09-10-2008 06:25 AM
Hi David,
1.What are the ports( Ethernet/Fastethernet/Gigabit/TenGigabit) on peer side ?
2.interface TenGigabitethernet
swicthport
switchport mode trunk
channel-group 1 mode on
this should work.
3.hope you are doing same config on peer side ??
4.Also if possible paste the config of all 10gig interface 2 on one side & 2 on another side , as well as confgi of port-channel interface ??
HTH..rate if helpful..
09-10-2008 02:02 PM
Thanks for all.... I have 2 Switch Catalyst 4503 that has every one 2 modules of 10 Giga... and i need configure etherchannel over that 2 modules of 10 Gigas....I use the commands taht you send me..but you forget the command global "interface Port-channel1" ??.. or it is confiigure by default ??...please help me..thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide