05-17-2015 03:39 PM - edited 03-08-2019 12:02 AM
Hello everyone.
I need to do 10 EtherChannels, I think that in the 2960S only support 06.
I want to know if making a stacking between 2960S would increase the etherchanel
Solved! Go to Solution.
05-17-2015 04:22 PM
Hello,
Cisco documentation states,
do not try to configure more than 6 etherchannels per switch stack
and
configure up to 16 interfaces in an Etherchannel, with 8 active and 8 in standby mode.
Link below points to the 2960S documentation.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swethchl.html#wp1275881
Hope this helps,
Please rate helpful posts.
Thanks.
05-17-2015 04:22 PM
Hello,
Cisco documentation states,
do not try to configure more than 6 etherchannels per switch stack
and
configure up to 16 interfaces in an Etherchannel, with 8 active and 8 in standby mode.
Link below points to the 2960S documentation.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swethchl.html#wp1275881
Hope this helps,
Please rate helpful posts.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide