Etherchanneling

[mr.junaiddwp1]

Hi ,

Can someone tell how to resolve the problem as i have given .. I have two 3560 Switches connected with each other by configuring etherchannel on port fa 23,24 port same on both. But i am getting error, while it had completle to configure.

Error : 

%EC-5-CANNOT_BUNDLE2: Fa0/24 is not compatible with Po1 and will be suspended (vlan mask is different)

Thanks

Have a good time.

[Alberto Romano]

Hi,

how did you configured the Port-channel? Can you provide the output of the commands from each 3560... "show run int Po1", "show run int Fa0/23", "show run int Fa0/24"... thanks!

[mr.junaiddwp1]

Hi,

Thanks for asking before i just found mismatch in my configuration.I have found that this error displayed, when the vlans assigned to port-channel and interfaces were not same, it did not retrieve correctly, appling this change I got my interfaces in a group, as it is better to know that etherchannel required same configuration on all interfaces..

Thanks,

Have a good time.

[Alberto Romano]

Obviously this is true. Good job!