07-07-2022 03:12 AM
I only want to filter out the names of the interfaces of a switch using the command "Show interface status". How can I apply filtering to this command?
Solved! Go to Solution.
07-08-2022 03:40 AM
now i feel look bright your explantion :
https://pynet.twb-tech.com/blog/netmiko-python-library.html
i used document - get dynamic VLAN all over my network 1000 switches, good to get in to CSV and use later..
good learning.
07-07-2022 03:19 AM
if the port have description, you can do below : (if not please let us know)
#show interfaces description
07-07-2022 03:26 AM
#sh ip int brief
07-07-2022 08:26 AM
Actually I am writing a python script ...so I want to filter out only the names of the interfaces to append them to a separate python list.
07-07-2022 09:01 AM
give some example for to suggest better ?
command level give us the output with show commands ?
07-07-2022 11:32 AM
this is command reference
show interfaces [interface interface-number] status [err-disabled | module number | vlan vlan]
07-07-2022 12:32 PM
You might also pipe the output and possibly "include" or "exclude" what you want to capture from your show interface status command.
07-07-2022 09:55 PM - edited 07-07-2022 09:56 PM
My problem got solved using use_textfsm = True in the netmiko library.
Thank You.
07-07-2022 11:46 PM
textfsm, TTS, genie - good modules (i used lot)
since we do not know your requirement - we are not suggested or given advise as expected.
07-08-2022 12:52 AM
I was supposed to filter out the output of the command show interface status to get only the interface names.
07-08-2022 03:40 AM
now i feel look bright your explantion :
https://pynet.twb-tech.com/blog/netmiko-python-library.html
i used document - get dynamic VLAN all over my network 1000 switches, good to get in to CSV and use later..
good learning.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide