06-02-2022 07:04 AM - edited 06-02-2022 07:11 AM
Hi,
The following problem involves a firewall (10.249.0.13) wanting to close a BGP connection with its neighboring switch (10.249.0.14).
The switch answers with a BGP NOTIFICATION message that contains "No supported AFI/SAFI". (separate issue) The firewall then sends a FIN to the switch to close the TCP connection. Follows a series of FIN retransmissions from the firewall and ACK retransmissions from the switch.
Is there a way to determine which side is not understanding here?
I have included an excerpt of the .pcap.
Thanks
06-02-2022 07:06 AM
are you config FW to bypass BGP or it BGP peer?
06-02-2022 09:34 AM
No we're not.
06-02-2022 07:32 AM
anyway check this bug
https://quickview.cloudapps.cisco.com/quickview/bug/CSCvo58924
06-02-2022 09:35 AM
Thanks a lot for the link, I will check that out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide