i have router 2911 and i can't access by Username and password for first time open
when i tried to recovery of password ,i removed compact flash and i run the system ,
Once the router is on Rommon mode, i reinsert the compact flash,
after reboot the ios forget as per attached picture .
i try same Steps but the problem still.
please we need solution to return System
Here is the link which guide you for the password recovery process.
Below is the default settings for serial line
• Bits per sec: 9600
• Data bits: 8
• Parity: none
• Stop bits: 1
• Flow control: none
You can try changing these values or Bits per sec for the issue you are facing.