Hi,
I recently upgraded my router memory to 32 MB, however it seems it doesnt take it.
Kindly help.....
rommon 8 > set IP_ADDRESS=192.168.2.38
usage: set
rommon 9 > IP_ADDRESS=192.168.2.38
rommon 10 > IP_SUBNET_MASK=255.255.255.0
rommon 11 > DEFAULT_GATEWAY=192.168.2.1
rommon 12 > TFTP_SERVER=192.168.2.222
rommon 13 > TFTP_FILE=c2600-is-mz.123-26.bin
rommon 14 > tftpdnld
IP_ADDRESS: 192.168.2.38
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 192.168.2.1
TFTP_SERVER: 192.168.2.222
TFTP_FILE: c2600-is-mz.123-26.bin
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y/n: [n]: y
get_man_dev: Unknown device - probably NOT formatted.
unknown flash device - mandev code = 0xffff
cannot read flash info
TFTP: Error, insufficient flash installed to load image.
TFTP: Operation terminated.
rommon 15 >
rommon 15 > meminfo
Main memory size: 24 MB.
Available main memory starts at 0x10000, size 24512KB
IO (packet) memory size: 25 percent of main memory.
NVRAM size: 32KB
rommon 16 >
rommon 16 > dir flash:
get_man_dev: Unknown device - probably NOT formatted.
unknown flash device - mandev code = 0xffff
cannot read flash info
getdevnum warning: device "flash" has size of zero
get_man_dev: Unknown device - probably NOT formatted.
unknown flash device - mandev code = 0xffff
cannot read flash info
getdevnum warning: device "flash" has size of zero
get_man_dev: Unknown device - probably NOT formatted.
unknown flash device - mandev code = 0xffff
cannot read flash info
getdevnum warning: device "flash" has size of zero
get_man_dev: Unknown device - probably NOT formatted.
unknown flash device - mandev code = 0xffff
cannot read flash info
getdevnum warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
dir: cannot open device "flash:"
rommon 17 >
Thanks,
Jenni.
