Fortigigbit ports in c9300

[Leftz]

Hi Catalyst 9300-24p has 24 Gigbit ports and 8 Tengigbit ports physically. but command show run shows it has additional Fortigig and TentiFivegig port. How do these port config and work? Thanks

interface GigabitEthernet1/0/23
!
interface GigabitEthernet1/0/24
!
interface GigabitEthernet1/1/1
!
interface GigabitEthernet1/1/2
!
interface GigabitEthernet1/1/3
!
interface GigabitEthernet1/1/4
!
interface TenGigabitEthernet1/1/1
!
interface TenGigabitEthernet1/1/2
!
interface TenGigabitEthernet1/1/3
!
interface TenGigabitEthernet1/1/4
!
interface TenGigabitEthernet1/1/5
!
interface TenGigabitEthernet1/1/6
!
interface TenGigabitEthernet1/1/7
!
interface TenGigabitEthernet1/1/8
!
interface FortyGigabitEthernet1/1/1
!
interface FortyGigabitEthernet1/1/2
!
interface TwentyFiveGigE1/1/1
!
interface TwentyFiveGigE1/1/2
!
interface AppGigabitEthernet1/0/1

[balaji.bandi]

Depending on the module installed you need to use the right interface - what is the version of the code, some old code has bug,

that was fixed in 17.3.X or use 17.3.6 or 17.6.4

[Leftz]

Thanks @balaji.bandi 

The version is 17.6.4. It should not have the issue. Anyway we need to configure it based on physical interface, right? 

[balaji.bandi · Accepted solution]

True, example - if you installed NM 8X  - then ten gig port 

Flexible and dense uplink offerings with 100G, 40G, 25G, Multigigabit, 10G, and 1G modular uplinks

[Leftz]

Thank you!