06-02-2010 10:26 PM - edited 03-06-2019 11:23 AM
R1-----R5-----R3,R5 is frame-relay switch ,. R1 can not communite with R3, what is the wrong ,please ?
R5
interface Serial1/0 ###### to R1
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 231 interface Serial1/1 233
!
interface Serial1/1 #### to R3
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 233 interface Serial1/0 231
R1
interface Serial1/0
ip address 1.1.1.1 255.255.255.0
encapsulation frame-relay
serial restart-delay 0
R3
interface Serial1/1
ip address 1.1.1.2 255.255.255.0
encapsulation frame-relay
serial restart-delay 0
Solved! Go to Solution.
06-02-2010 11:26 PM
Hello Zhiwei,
on DTE routers try to use point-to-point subinterfaces and to use frame-relay interface-dlci to see if the issue is related to inverse-ARP
Hope to help
Giuseppe
06-02-2010 11:26 PM
Hello Zhiwei,
on DTE routers try to use point-to-point subinterfaces and to use frame-relay interface-dlci to see if the issue is related to inverse-ARP
Hope to help
Giuseppe
07-21-2016 06:38 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide