06-15-2011 12:07 AM - edited 03-07-2019 12:49 AM
Hi
I powerd on cisco6509E and getting following error for all the 6724SFP blades.
" 2 WS-X6724-SFP 125.16 2.98 - - on off (FRU-power failed)"
Router#sh power
system power redundancy mode = redundant
system power total = 2671.20 Watts (63.60 Amps @ 42V)
system power used = 905.52 Watts (21.56 Amps @ 42V)
system power available = 1765.68 Watts (42.04 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-6000W 2671.20 63.60 OK OK on
2 WS-CAC-6000W 2671.20 63.60 OK OK on
Pwr-Allocated Oper
Fan Type Watts A @42V State
---- ------------------ ------- ------ -----
1 WS-C6509-E-FAN 150.36 3.58 OK
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
2 WS-X6724-SFP 125.16 2.98 - - on off (FRU-power failed)
3 WS-X6724-SFP 125.16 2.98 125.16 2.98 on on
5 WS-SUP720-BASE 315.00 7.50 315.00 7.50 on on
6 WS-SUP720-BASE 315.00 7.50 315.00 7.50 on on
Router#
Router#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL10499RHM
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL10489E4G
5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAL1006CU6X
6 2 Supervisor Engine 720 (Hot) WS-SUP720-BASE SAD084304AB
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
2 0019.56f3.5074 to 0019.56f3.508b 2.5 Unknown Unknown PwrDown
3 0019.5606.57f4 to 0019.5606.580b 2.5 12.2(14r)S5 12.2(33)SXH4 Ok
5 0013.c43a.8220 to 0013.c43a.8223 3.5 8.4(2) 12.2(33)SXH4 Ok
6 0011.21ba.7160 to 0011.21ba.7163 3.1 8.1(3) 12.2(33)SXH4 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
2 Centralized Forwarding Card WS-F6700-CFC SAD103803AG 3.0 PwrDown
3 Centralized Forwarding Card WS-F6700-CFC SAL1033YASX 3.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3A SAL1006CPAX 2.6 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD1002038K 2.7 Ok
6 Policy Feature Card 3 WS-F6K-PFC3A SAD08400567 2.4 Ok
6 MSFC3 Daughterboard WS-SUP720 SAD08400261 2.3 Ok
Mod Online Diag Status
---- -------------------
2 Not Applicable
3 Pass
5 Pass
6 Pass
Router#sh power
system power redundancy mode = redundant
system power total = 2671.20 Watts (63.60 Amps @ 42V)
system power used = 905.52 Watts (21.56 Amps @ 42V)
system power available = 1765.68 Watts (42.04 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-6000W 2671.20 63.60 OK OK on
2 WS-CAC-6000W 2671.20 63.60 OK OK on
Pwr-Allocated Oper
Fan Type Watts A @42V State
---- ------------------ ------- ------ -----
1 WS-C6509-E-FAN 150.36 3.58 OK
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
2 WS-X6724-SFP 125.16 2.98 - - on off (FRU-power failed)
3 WS-X6724-SFP 125.16 2.98 125.16 2.98 on on
5 WS-SUP720-BASE 315.00 7.50 315.00 7.50 on on
6 WS-SUP720-BASE 315.00 7.50 315.00 7.50 on on
Router#
============================================================================
Any information or pointer to solve this issue ??
Thanks
06-15-2011 09:38 AM
The line card gone bad and we are doing RMA :-(
06-15-2011 11:20 AM
******playing the violin ever so slowly******
Just kidding, good luck with your RMA.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide