05-07-2016 12:05 PM - edited 03-08-2019 05:39 AM
Here is one that’s been bugging me for ages, I’ve got a 2691 IOS router running in the latest version of GNS3 (1.4.6 as of today) and the latest version of W10 Pro. The router is bound to a cloud which is then connected to an interface on the host with full access to the LAN the host is on. Here is my problem, so I can ping all devices including the GW and receiving a response back from the IOS router except the host W10 machine that is running dynamips, and as well the host cannot ping the IOS router.
So here is what I’ve done:
Disable Windows Firewall.
Disabled A/V.
Posted on GNS3 Jungle with no reply for weeks (obviously something to do with W10 then).
Used a loopback adapter instead but no change (can’t even ping anything on the LAN then even with the loopback configured with the LAN IP specifics).
Re-installed GNS3.
Disabled TCP/UDP checksum offloading.
Ran a PCAP on the device, I’ve noticed that if I ping the IOS device then no reply is received and only requests are sent and if I then try ping from the IOS device I can see both request/reply but no notice on the IOS router. So the issue is it’s being dropped once sending from the host.
05-07-2016 12:19 PM
Hi!
Are you using your wireless NIC at the same time?
Can you post your route print ouput from windows command line?
Best regards!
JC
05-09-2016 12:09 PM
Hi,
No I just have one realtek gigabit Ethernet card, here is the config from one simple router:
Host IP addr is 192.168.1.3/24
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname LAB-VRTR-01
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip icmp rate-limit unreachable
ip cef
!
!
!
!
no ip domain lookup
ip domain name lab.airnet.org.uk
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
username dude privilege 15 secret 5 $1$WDXM$ZZ828NdfK.ZwBdrr/FpI50
!
!
ip tcp synwait-time 5
ip ssh version 2
!
!
!
!
!
interface FastEthernet0/0
ip address 192.168.1.4 255.255.255.0
duplex auto
speed 100
!
interface Serial0/0
no ip address
shutdown
clock rate 2000000
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
clock rate 2000000
!
interface FastEthernet1/0
no ip address
shutdown
duplex auto
speed auto
!
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
!
!
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
login local
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
logging synchronous
login local
transport input ssh
!
!
end
06-03-2016 03:59 PM
Anyone think they may know the answer?
10-04-2016 06:32 PM
Are you running GNS3 from VMWARE with ubuntu? I was able to do it using VMWARE with ubuntu and enabling NAT inside VMWARE. Also I added a route add command inside of windows command prompt to add the network I was trying to reach.
10-06-2016 12:38 PM
Wasn't an IP routing issue, see here: https://www.gns3.com/qa/gns3-1-4-5-asa-cannot-ping-host
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide