01-26-2009
08:44 AM
- last edited on
03-25-2019
04:04 PM
by
ciscomoderator
Hello team,
I've got a bit of a troublesome issue with the GRE tunnel here, and any help will certainly be appreciated.
I have a GRE tunnel initiating from a Cisco 3845, thro' a Cisco ASA 7.2(4) and terminating on a Cisco 2811.
Thing is, every now and then, the tunnel hangs up and we have to shutdown both ends (interfaces), wait for 5 mins and then bring them back up. This is Cisco's recommendation.
However, this is happening on a more frequent basis and shut , no shut is not a workable option.
Any suggestions on how I can keep the tunnel from hanging up?
Thanks,
01-26-2009 10:37 AM
Victor,
1- Yes u are correct, I beleive he should apply (Path MTU Discovery) in order to prevent any Packet fragmentation which could cause a High latency an inconssistency performance.
2- If the Tunnel dies, then a possible cause would be a ( Recursive Tunneling ) issue. Make sure the Tunnel Source is not the same as the Tunnel destination.
HTH
Mohamed
01-26-2009 10:40 AM
Mohammed,
I'll google Path MTU Discovery. The tunnel source is not the tunnel destination.
Thanks,
01-26-2009 11:13 AM
Pls Have a look at the bellow link, If u search google u will also get the same:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094690.shtml
HTH
Mohamed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide