GUI access to Nexus 3548

[faisalponnakaran]

Guys I need to enable GUI access to my nexus switch. Is there any commands to enable http, i cant able to access by http://ip-of-nexus.

The version is

system image file is:    bootflash:/n3500-uk9.5.0.3.A1.1.bin

and

NExus-EDC-N3K-S2# sh feature

Feature Name          Instance  State

--------------------  --------  --------

bfd                   1         disabled

bfd_app               1         disabled

bgp                   1         disabled

dhcp                  1         disabled

eigrp                 1         disabled

eigrp                 2         disabled

eigrp                 3         disabled

eigrp                 4         disabled

hsrp_engine           1         enabled

interface-vlan        1         enabled

lacp                  1         enabled

ldap                  1         disabled

msdp                  1         disabled

nat                   1         disabled

ospf                  1         disabled

ospf                  2         disabled

ospf                  3         disabled

ospf                  4         disabled

ospfv3                1         disabled

ospfv3                2         disabled

ospfv3                3         disabled

ospfv3                4         disabled

pim                   1         disabled

poe                   1         disabled

private-vlan          1         disabled

privilege             1         disabled

ptp                   1         disabled

rip                   1         disabled

rip                   2         disabled

rip                   3         disabled

rip                   4         disabled

scheduler             1         disabled

scpServer             1         disabled

sflow                 1         disabled

sshServer             1         enabled

tacacs                1         disabled

telnetServer          1         enabled

tunnel                1         disabled

udld                  1         disabled

vpc                   1         disabled

vrrp                  1         disabled

vtp                   1         disabled

Nexus-EDC-N3K-S2#

It doesnt show http, Does that mean it doesnt have http feauture? Request your assistance

[Bilal Nawaz]

Hello Faisal,

I think from NXOS v5.x.x Cisco have removed the http feature as it is a security risk, it was there in v4. Instead of using device manager, you may need to use fabric manager from Cisco - this includes the device manager features. Enabling the http feature only allowed the device to be managed via DM i think.

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fund/fm/fmfund_5_0_1.html

Please see here also:

https://supportforums.cisco.com/thread/2101256

Hope this helps

Please rate useful posts & remember to mark any solved questions as answered. Thank you.