I created a vlan in distribution 1.name of the vlan is VLAN 96 and add the port in Access switch port no 0/2 (please find the configuration of vlan below )from the access switch we can able to ping 10.204.96.1 that is gateway .But when i added port in the access switch (vlan 96) and give the static ip address to the host i cant able to ping the gateway .what are reason please help me on this .
distribution 1
---------------------
interface Vlan96
ip address 10.204.96.2 255.255.255.0
ip helper-address 10.204.74.20
standby 96 ip 10.204.96.1
standby 96 priority 200
standby 96 preempt
standby 96 track TenGigabitEthernet1/1 60
standby 96 track TenGigabitEthernet3/5 60
distribution 2
---------------------
interface Vlan96
ip address 10.204.96.3 255.255.255.0
ip helper-address 10.204.74.20
standby 96 ip 10.204.96.1
standby 96 preempt
standby 96 track TenGigabitEthernet1/1 60
standby 96 track TenGigabitEthernet3/5 60
Access switch
--------------------
sh vlan
96 Vlan active Gi0/2, Gi0/9,
Access switch
----------------------
# sh ip int br
Interface IP-Address OK? Method Status Protocol
Vlan1 unassigned YES NVRAM administratively down down
Vlan72 10.204.72.5 YES NVRAM up up
Vlan96 unassigned YES NVRAM up up
GigabitEthernet0/1 unassigned YES unset down down
GigabitEthernet0/2 unassigned YES unset down down
