cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8712
Views
0
Helpful
1
Replies

health check commands for cisco 3850

donnie
Level 1
Level 1

Hi all,

Can I know what are the commands available to check the health status of cisco 3850 switches?

TIA!

1 Accepted Solution

Accepted Solutions

Mark Malone
VIP Alumni
VIP Alumni

Take look at this link covers a lot of check commands general for most switches not all commands will work though looking them fro 3850

show env all and show proc cpu sorted show logg usually good to start with

https://habibahsan.wordpress.com/2010/01/11/basic-health-check-up-command-for-cisco/

This as well is specific to 3850 live hardware diagnostics

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/system_management/configuration_guide/b_sm_3se_3850_cg/b_sm_3se_3850_cg_chapter_01101.html

 

View solution in original post

1 Reply 1

Mark Malone
VIP Alumni
VIP Alumni

Take look at this link covers a lot of check commands general for most switches not all commands will work though looking them fro 3850

show env all and show proc cpu sorted show logg usually good to start with

https://habibahsan.wordpress.com/2010/01/11/basic-health-check-up-command-for-cisco/

This as well is specific to 3850 live hardware diagnostics

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/system_management/configuration_guide/b_sm_3se_3850_cg/b_sm_3se_3850_cg_chapter_01101.html