cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
29562
Views
0
Helpful
2
Replies

Health Check of a Switch

qwertys21
Level 1
Level 1

To check whether a switch is healthy and all is ok what should I be looking for in addition to the following?

show logs

show proc cpu

show proc mem

show env all

What else should I be looking for?

Thanks

2 Replies 2

ankbhasi
Cisco Employee
Cisco Employee

Hi Friend,

Which switch is this? If thee are the modular switches then you can also issue a command "sh mod" to check the modules status and "sh test" to give you port and line cards status.

HTH

Ankur

jon.axe
Level 1
Level 1

One additional command I use is the show version command. This command tells me whether the switch was last rebooted by a loss of power or if it was rebooted by a software crash or a hardware failure.

These are good basic commands to use but it is always important to have the latest stable release of IOS installed on your switch.

Review Cisco Networking for a $25 gift card