help required TACACS+ and radius lab

[abdulmajidjamil]

guidance required regards this 

1: Identify the network Region and highlight it with help of drawing tool

2: Use an appropriate IPv4 scheme for the given topology and configure the environment

3: The PC0 and PC7 from network and 1 and 2 respectively, could not communicate outside its network region, while others PCs/Hosts from both networks could communicate.

 4: Network 1 hosts should be authenticate via TACACS+ server using path Router 0, Router2, Router4 -> Server. Network 2 hosts should be authenticate via RADIUS server using path Router 0, Router1, Router3 -> Server.

5: TACACS+ use password “tacacslogin” and for RADIUS use “radius login”.'

i have a .pkt file i will share with you in email abdulmajidjamil@hotmail.com and WhatsApp :+923122542308

[Georg Pauwen]

Hello,

post the zipped Packet Tracer project (.pkt) file here.

[abdulmajidjamil]

hi Georg,

Hope you are doing well on this pandemic. thank you for your response 

[Georg Pauwen]

Hello,

thanks for the file. What specifically do you need help with ?

[abdulmajidjamil]

firstly Identify the network Region i have some confusion then i know how to assign ipv4 
secondly this point The PC0 and PC7 from network and 1 and 2 respectively, could not communicate outside its network region, while others PCs/Hosts from both networks could communicate.

also this Network 1 hosts should be authenticate via TACACS+ server using path Router 0, Router2, Router4 -> Server. Network 2 hosts should be authenticate via RADIUS server using path Router 0, Router1, Router3 -> Server.

and this TACACS+ use password “tacacslogin” and for RADIUS use “radius login”.'

[Georg Pauwen]

Hello,

I'll put something together to get you started...

[abdulmajidjamil]

sure come on whatsapp

[Georg Pauwen]

Hello,

I put together the network with basic IP connectivity. For point 3, you probably need an access list. Try and see what you can come up with for point 4 and 5.

[abdulmajidjamil]

PC0 AND PC7 ABLE TO COMMUNICATE OUTSIDE THE NETWORK I THINK WE CONFIGURE ACL ON R0 

[Georg Pauwen]

Hello,

exactly, the access list needs to be configured on Router0.