03-27-2007 08:10 AM - edited 03-05-2019 03:07 PM
Hello,
I am trying to restore a router config file using copy tftp://ipaddress/filename.cfg startup-config and keep getting an error
%error opening tftp://ipaddress/filename (Not enough space)
Solved! Go to Solution.
03-28-2007 07:21 AM
sure can. Just go into config mode and paste it in. I would do it in chunks so you can see if anything fails and why. But as long as you are using a feature set similar to what you where using you should be ok.
HTH
Anthony
03-27-2007 09:58 AM
Try copying it into running-config first and then enable "service compress-config" and then "copy running start". My guess is that the file may be too big for NVRAM.
03-27-2007 10:14 AM
I have tried coping to running-config
I have tried erase startup-config
The config file is only 2K
03-28-2007 05:34 AM
Anyone have any other ideas?
I really need to restore this router!
03-28-2007 06:15 AM
Why not just paste it in from notepad into the terminal emulator?
Anthony
03-28-2007 06:30 AM
can you do paste the entire config?
03-28-2007 07:21 AM
sure can. Just go into config mode and paste it in. I would do it in chunks so you can see if anything fails and why. But as long as you are using a feature set similar to what you where using you should be ok.
HTH
Anthony
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide