06-17-2014 05:45 PM - edited 03-07-2019 07:45 PM
Hope someone can help with this common problem. Have a couple of vlans configured on an ASA 5505 and I can't pass traffic between them.
specifically trying to pass traffic between vlan1 and vlan10
Thanks for the help.
06-18-2014 04:01 AM
Can you diagram your setup for us?
Thanks
06-18-2014 07:44 AM
06-18-2014 07:44 AM
Presumably this is the connection to the 2960x switch?
interface Ethernet0/1
Are your clients able to ping their default gateways on the Vlans?
06-18-2014 08:45 AM
correct. ASA 5505 e0/1 connects to 2960x G1/0/44
correct. vlan 1 client PC can ping 192.168.1.1 and vlan 10 client PC can ping 192.168.10.1
06-19-2014 02:51 AM
Unlike a Router, an ASA appliance will try and NAT traffic going from one internal subnet to another.
You need to add a static NAT per subnet, as below:
static (inside,PHONE) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (PHONE,inside) 192.168.10.0 192.168.10.0 netmask 255.255.255.0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide