08-28-2012 01:17 AM - edited 03-07-2019 08:34 AM
Hi Everyone,
I need help setting up a VLAN. We just bought the SG500x switches and we need to create several VLANs.
So for example:
192.168.1.x --> Vlan 1
192.168.2.x --> Vlan 2
192.168.3.x --> Vlan 3
What I would like to know is how do I come about setting this up and do I have to do something with my DHCP server to allow this to happen?
08-28-2012 06:16 AM
Here is the page where all the info for your model switch can be found.
08-28-2012 07:25 AM
Hi Tanoop,
To create a VLAN:
STEP 1
Click VLAN Management > Create VLAN. The Create VLAN page is displayed.
The Create VLAN page displays the following fields for all VLANs:
VLAN ID
—User-defined VLAN ID.
VLAN Name
—User-defined VLAN name.
Type
—VLAN type:
Dynamic
—VLAN was dynamically created through Generic VLAN
Registration Protocol (GVRP).
Static
—VLAN is user-defined.
Default
—VLAN is the default VLAN.
STEP 2
Click Add to add a new VLAN or select an existing VLAN and click Edit to modify the VLAN parameters. The Add/Edit VLAN page is displayed. The page enables the creation of either a single VLAN or a range of VLANs.
STEP 3
To create a single VLAN, select the VLAN radio button, enter the VLAN ID (VID) and optionally the VLAN Name. To create a range of VLANs, select the Range radio button, and specify the range of VLANs to be created by entering the Starting VID and Ending VID, inclusive. When using the Range function, the maximum number of VLANs you can create at one time is 100.
STEP 4
Click Apply
Use this admin ghuide to creat vlan and configure vlan interface settings:
www.cisco.com/en/US/docs/switches/lan/csbms/Sx500/administration_guide/500_Series_Admin_Guide.pdf
Regards
Please rate if it helps.
want to know more about, how to create the VLAN(s).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide