How can create stack switch which in 9500 series

[support]

Hi

I want to create stack switch which in 9500 series,but here is some questions that they are should be in same Part number or same series.For Example can i create stack switch with these P/N : C9500-40X-A and C9500-32C-A

or should be with these state: C9500-40X-A and C9500-40X-A??

[balaji.bandi]

Cat 9500 new term called StackWise virtual  ( you can do stacking on Cat 9200 / Cat 9300)

stack members in a StackWise Virtual domain must be the same model.

here is the details information :

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9000/nb-06-cat-9k-stack-wp-cte-en.html#:~:text=StackWise%20Virtual%20(SV)%20combines%20two,control%20plane%20and%20management%20perspectives.&text=From%20the%20data%2Dplane%20and,Vir...

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-6/configuration_guide/b_166_ha_9500/b_166_ha_9500_chapter_01.html

https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-3850-series-switches/q-and-a-c67-738577.pdf