06-13-2015 05:49 AM - edited 03-08-2019 12:32 AM
Hi
I can connect to a 3750 switch and there is another 2960 switch connected to this switch.
The port of 3750 switch connected to 2960 switch is an access vlan 106.
There is a SVI interface ( vlan 110) in 3750 switch with ip address 10.0.1.75 that is management ip address i can connect to it.
When i do show cdp neighbor detail i see the ip address of 2960 switch is 172.16.1.30 but i can't ping this ip address from 3750 switch and i can't connect to it from my computer.
Is there any solution that I can get an ip address from 2960 switch to test connectivity to this switch?
Thanks in advance,
06-13-2015 08:34 AM
Hi,
put the port connecting both switches in trunk mode and create an SVI for Vlan 110 on the 2960 Switch and you'll be able to connect to it.
Regards,
Alain
06-13-2015 09:06 AM
Thanks for your response
But i cant connect to 2960 switch for doing any action, I know there is SVI interface on it and i think it's interface vlan 110. I want to know how can i find ip address of this interface vlan? How can i get this kind of information from 3750 switch?
06-13-2015 10:06 AM
Hi,
show cdp neighbor detail should give you this info.
Regards,
Alain
06-13-2015 09:23 PM
Hi,
I had done show cdp neighbor detail and I had found an ip address like 172.16.2.1.
The 3750 interface SVI was 10.0.1.75, anyway with this configuration I couldn't connect to 2960 switch.
Is there any command or method that I can get another ip address maybe vlan 110 ip address of 2960 switch(management SVI)?I think this ip address should be in subnet 10.0.1.0/24 that i can connect to it, because in 3750 there is no route.
06-14-2015 12:52 AM
Murtaza,
Sorry there is no way to get the ip address of thst vlan from 3750 switch.
Hth
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide