02-21-2012 12:51 PM - edited 03-07-2019 05:05 AM
Hello,
I have been given 2 x 3750 switches that were a stack, I need to keep the configs on both but how do I make them individual switches again and remove the stack info?
Thanks
02-21-2012 12:55 PM
02-22-2012 03:15 AM
Hi,
When I try to remove the switch from the stack I get this error:
%IDBs can not be removed when switch is active
Any ideas?
Thanks
02-22-2012 03:24 AM
When I try to remove the switch from the stack I get this error:
1. Power down the 2nd switch;
2. Remove the statement "switch 2 provisioning" ... using the "no switch 2 provisioning" command;
3. Remove the stacking cable from the 2nd switch;
4. Power up the 2nd switch and in configuration mode use the command "switch 2 renumber 1"; and
5. Reboot switch #2.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide