How do i boot the switch from here

[PranaykumarThatikonda01607]

Hi Guys,

Can someone help me with how to boot the switch from the following situation. Thanks in advance

[paul driver]

Hello

flash_int
load_helper

boot xxxxxxx.bin

[PranaykumarThatikonda01607]

no luck

switch: flash_int
Unknown cmd: flash_int

switch: load_helper
Unknown cmd: load_helper

switch: boot c3560e-universalk9-mz.152-4.E9.bin
Unknown cmd: boot

[paul driver]

For some reason my post didnt show what i wanted it to post
try

boot flash:/xxxxx.bin

[PranaykumarThatikonda01607]

Thanks for your response, but still no luck

switch: boot flash:/c3560e-universalk9-mz.152-4.E9.bin
Unknown cmd: boot

switch:

[Leo Laohoo]

Post the complete output to the command "set".

Reboot the switch and post the complete boot-up process. 

NOTE:  Do not post screenshots.  Either copy-n-paste the output or log output to a text file.

[PranaykumarThatikonda01607]

Hi Leo,

Thanks for your response; the following is the output for "set."

switch: set
!=-
BAUD=9600
BOOT=flash:c3560e-universalk9-mz.152-4.E9.bin
LICENSE_BOOT_LEVEL=ipbase
MAC_ADDR=00:eb:d5:c9:0a:80
MANUAL_BOOT=no
MODEL_NUM=SM-X-ES3-24-P
RESET_REASON=Reload command
SDM_TEMPLATE_ID=0
SWITCH_PRIORITY=1
SYSTEM_DOWNSHIFT_CFG=1
SYSTEM_DOWNSHIFT_COUNTER_CFG=3
SYSTEM_SERIAL_NUM=FOC20252LU3

switch:

[Leo Laohoo]

In ROMMON, type "?" and show us what output appears.

[Mohsin Alam · Accepted solution]

follow this:

switch: reset

then enter yes

switch: boot flash:c3560e-universalk9-mz.152-4.E9.bin

## Make sure to mark post as helpful, If it resolved your issue. ##

[PranaykumarThatikonda01607]

Thank you Mohsiala, it worked