11-30-2015 01:06 AM - edited 03-08-2019 02:53 AM
Hi Team Cisco,
In Datasheet Cisco for 3650 Switch for the Flash is 2 GB
The Questions was how to check the flash in Cisco Switch 3650, we already run "show version" and "show file systems".
Here the result for command "show file systems" :
Switch#sh file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
248354816 247344128 disk rw crashinfo:
* 1621966848 1359474688 disk rw flash:
- - disk rw usbflash0:
0 0 disk ro webui:
- - opaque rw system:
- - opaque rw tmpsys:
- - nvram rw stby-nvram:
- - nvram rw stby-rcsf:
- - opaque rw null:
- - opaque ro tar:
- - network rw tftp:
2097152 2074409 nvram rw nvram:
- - opaque wo syslog:
- - network rw rcp:
- - network rw http:
- - network rw ftp:
- - network rw scp:
- - network rw https:
- - opaque ro cns:
Assuming value in the command 1621966848 adding 248354816, Totaly 1870321664 bytes. From value Totaly how we to provent it because the value far from 2 GB, any body know. Thanks
rgds,
Aris
11-30-2015 02:30 AM
hey all you need is dir , coumnt 6 back in from right gives 1102 mb free
1621966848 bytes total (1102143488 bytes free)
3850A#dir
Directory of flash:/
46466 -rwx 2097152 Nov 7 2015 00:18:54 +00:00 nvram_config
46467 -rwx 74369716 Mar 4 2014 03:32:33 +00:00 cat3k_caa-base.SPA.03.02.03.SE.pkg
46468 -rwx 5808828 Mar 4 2014 03:32:33 +00:00 cat3k_caa-drivers.SPA.03.02.03.SE.pkg
46469 -rwx 32496484 Mar 4 2014 03:32:33 +00:00 cat3k_caa-infra.SPA.03.02.03.SE.pkg
46470 -rwx 30418104 Mar 4 2014 03:32:33 +00:00 cat3k_caa-iosd-universalk9.SPA.150-1.EX3.pkg
46471 -rwx 16059104 Mar 4 2014 03:32:33 +00:00 cat3k_caa-platform.SPA.03.02.03.SE.pkg
46472 -rwx 64586444 Mar 4 2014 03:32:33 +00:00 cat3k_caa-wcm.SPA.10.0.120.0.pkg
46473 -rwx 1224 Mar 4 2014 03:32:43 +00:00 packages.conf
46474 -rw- 676 Oct 29 2015 15:56:27 +00:00 vlan.dat
46475 -rw- 290796004 Jul 15 2015 07:22:34 +00:00 cat3k_caa-universalk9.SPA.03.06.02a.E.152-2a.E2.bin
77442 drwx 4096 Jul 25 2015 14:14:58 +00:00 dc_profile_dir
1621966848 bytes total (1102143488 bytes free)
11-30-2015 07:06 AM
Hi Mark,
Yes I already know for the command "dir flash", but actually the questions is the Result of "dir flash" . I Have the same number with you capture were 1621966848 bytes. Were the result "1621966848" same with 2 GB Flash, i dont think so. Because 2 GB convert to bytes mean around the value 1862645149 bytes
Like I said before in beginning post, Is the sum of 1621966848 (flash) and 248354816 (crashinfofiles) became a total flash
rgds,
Aris
11-30-2015 06:33 AM
Hello Aris,
Adding to Mark's comment , Have a look on the below link for more information.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/3se/system_management/configuration_guide/b_sm_3se_3650_cg/b_sm_3se_3650_cg_chapter_010100.html
Hope it Helps..
-GI
11-30-2015 07:29 AM
Hi Ganesh,
Thanks for the link, Yes I already know the command. But FYI I want to know 2GB Flash convert to bytes were around 1862645149 bytes, but in the real why the value were 1621966848 bytes.
rgds,
Aris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide