How to differentiate WS-X6824-SFP-2T vs WS-X6824-SFP-2TXL ?

[Rasika Nayanajith]

As part of RMA process got below card. How do I verify that is 2TXL ? Is there any CLI command to verify this? 

Looks like Factory ID label is wrong here (it is not definitely a 48 port card :-( ) 

Thanks

Rasika

[Leo Laohoo · Accepted solution]

Flip the line card on it's back.  The correct PID should be a sticker.  It'll also determine if the line card is XL or plain. 

Another option is to invoke the command "sh module".  This is very useful if the DFC card was retrofitted.

[Rasika Nayanajith]

Hi Leo,

Thanks for the response. On back side of line card I see below, not indicating it is XL

Below is the output of "show module" where a XL card is in. Does it shows it is WS-6824-SFP-2TXL or 2T?

DR01#sho module 
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
 2 24 CEF720 24 port 1000mb SFP WS-X6824-SFP SAL16063VMY
 3 16 CEF720 16 port 10GE WS-X6816-10GE SAL160743BQ
 4 16 CEF720 16 port 10GE WS-X6816-10GE SAL160743BW
 5 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G SAL16074G46
 6 5 Supervisor Engine 2T 10GE w/ CTS (Hot) VS-SUP2T-10G SAL16084UB2

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
 2 c464.1341.9ce0 to c464.1341.9e33 1.0 12.2(18r)S1 15.0(1)SY Ok
 3 e8b7.4829.9df0 to e8b7.4829.9f0b 1.1 12.2(18r)S1 15.0(1)SY Ok
 4 c464.1341.a128 to c464.1341.a243 1.1 12.2(18r)S1 15.0(1)SY Ok
 5 588d.098a.d202 to 588d.098a.d33f 1.2 12.2(50r)SYS 15.0(1)SY Ok
 6 588d.098a.d3a1 to 588d.098a.d4de 1.2 12.2(50r)SYS 15.0(1)SY Ok

Mod Sub-Module Model Serial Hw Status 
---- --------------------------- ------------------ ----------- ------- -------
 2 Distributed Forwarding Card WS-F6K-DFC4-AXL SAL16020UZ2 1.1 Ok
 3 Distributed Forwarding Card WS-F6K-DFC4-EXL SAL16041SEU 1.1 Ok
 4 Distributed Forwarding Card WS-F6K-DFC4-EXL SAL16041SFK 1.1 Ok
 5 Policy Feature Card 4 VS-F6K-PFC4XL SAL16074DNW 1.0 Ok
 5 CPU Daughterboard VS-F6K-MSFC5 SAL16074A36 1.3 Ok
 6 Policy Feature Card 4 VS-F6K-PFC4XL SAL16084USD 1.0 Ok
 6 CPU Daughterboard VS-F6K-MSFC5 SAL16084WQ7 1.3 Ok

HTH

Rasika

[Rasika Nayanajith]

I think XL in that submodule indicating that

Mod Sub-Module Model Serial Hw Status 
---- --------------------------- ------------------ ----------- ------- -------
 2 Distributed Forwarding Card WS-F6K-DFC4-AXL SAL16020UZ2 1.1 Ok

HTH

Rasika

[Leo Laohoo · Accepted solution]

Yes, that's correct.  The "XL" in the DFC card is the one to look for. 

[Leo Laohoo]

Thanks for the ratings, Rasika.