04-24-2014 10:55 AM - edited 03-07-2019 07:12 PM
I have a Supervisor 7-E on its way to replace a bad one in a 4500 VSS cluster that handles my executive row and I've just realized I only have the foggiest idea what config is required to make it join the VSS cluster.
I've looked and not found anything on point. Does anyone have a quick cheat sheet on how to do this?
Solved! Go to Solution.
04-24-2014 06:26 PM
Hey Nathan,
I actually just wrote a similar doc for the 4500X VSS. You might want to review it, as it will follow many of the same practices.
Hope that helps
Luke
04-24-2014 06:26 PM
Hey Nathan,
I actually just wrote a similar doc for the 4500X VSS. You might want to review it, as it will follow many of the same practices.
Hope that helps
Luke
04-25-2014 06:39 AM
I actually was able to read between the lines of some different docs and came to the exact same conclusion. There is one BIG caveat that is not mentioned in your document and that is licensing.
04-25-2014 06:46 AM
Nathan.
Thanks for the feedback and I will actually revisit the doc and update the licensing info.
lp
05-07-2014 07:23 AM
Hi Nathan,
Did you replace SUP7-E successfully ?
I have 4503-E and SUP7-E and secondary SUP went faulty and will replace tomorrow. Can you share any document or your findings ?
Regards
Ahmed...
05-07-2014 08:14 AM
Are you talking about a VSS cluster of two 4503's, each with one supervisor or a single 4503 with dual sups?
This document covers licensing for the 4500 with Section 4 covering most of the scenerio's you need. Luke's document posted to this thread last week pretty much covers the entire process for VSS with one exception: After step 5 but before step 6, when the new unit is still standalone mode ensure the licensing is properly installed on the new Sup. Provide the output of "Show License UDI" to your TAC engineer and request a copy of the license file for that chassis. Once you have the license file install it as per the directions in the licensing document and then proceed to step 6.
05-17-2014 03:44 AM
Many thanks Nathan.
I replaced according to the document you provided. Worked perfectly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide