Dear.
we are using at cisco router ASR1001 the command: show ip cache flow, to see the conversations at real time.
this is a partial output of this command:
SITEL_CHINCHON_CD90445#sh ip cache flow
IP packet size distribution (392661M total packets):
1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480
.001 .315 .094 .040 .018 .014 .016 .009 .007 .004 .003 .005 .004 .004 .002
512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
.002 .002 .006 .020 .423 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 0 bytes
44606 active, 155394 inactive, 3027049335 added
31019322 ager polls, 2 flow alloc failures
Active flows timeout in 1 minutes
Inactive flows timeout in 10 seconds
last clearing of statistics never
Protocol Total Flows Packets Bytes Packets Active(Sec) Idle(Sec)
-------- Flows /Sec /Flow /Pkt /Sec /Flow /Flow
TCP-Telnet 42397940 9.8 11 199 112.3 4.8 20.6
TCP-FTP 6547097 1.5 17 77 26.9 4.5 20.4
TCP-Frag 3644 0.0 52 1213 0.0 6.3 20.5
TCP-other 15117006861 3519.7 15 734 55862.7 2.3 20.8
UDP-DNS 908257379 211.4 1 75 253.7 0.5 21.0
UDP-NTP 24850212 5.7 1 79 7.3 0.5 21.0
IP-other 1852470 0.4 20 291 8.7 57.4 4.0
Total: 24501929564 5704.8 16 682 91423.4 2.6 20.7
SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts
gi0/0/0.3430 10.2.111.71 gi0/0/1 74.125.229.129 06 c895 0050 14
gi0/0/0.3430 10.11.5.45 gi0/0/1 199.188.236.240 06 f2b8 0bd4 27
gi0/0/1 200.37.161.41 gi0/0/0.3430 10.2.111.71 11 a6bc 4fb0 1
gi0/0/0.3430 10.17.101.240 gi0/0/1 91.145.79.244 11 b5fd c1da 1
gi0/0/1 8.27.148.253 gi0/0/0.3430 10.200.222.91 06 078f c98a 375
gi0/0/0.3430 192.168.13.33 gi0/0/1 132.245.13.210 06 c061 01bb 1
gi0/0/1 132.245.16.242 gi0/0/0.3430 10.110.111.66 06 01bb c074 1
gi0/0/0.3430 10.2.111.94 gi0/0/1 1.125.158.237 11 27db 13d2 18
What we need to do is to sort this output command by Pkts in descending order.
when we use the command: show ip cache flow | include Pkts....the router does not show nothing.
the command: ip flow-top-talkers is not supportes at this router.
can you help, please?
Attn.