ā03-11-2018 10:58 PM - edited ā03-08-2019 02:12 PM
hi
this is hamza shahid i need little help here which is about taking backup and restore config file of switches and routers.
For example i telnet my switch or router and just go to that command which says just upload config file into switch from my computer and vice versa for backup.
kindly guide me with an easy way to do this all.
and another thing is can i use packet tracer config files for real switches?
Best Regards:
HAMZA SHAHID
Solved! Go to Solution.
ā03-13-2018 05:10 AM
ā03-12-2018 01:29 AM
ā03-13-2018 12:08 AM
i was asking to u that how to do that, i have a switch which is 2960G and connected through console so i will download lanbase image of K9 and then want to update my switch image , i don't want to use tftp & ftp or etc i just want that just upload my image from my system through console and then update my switch image so kindly let me know that way to do this all
Best Regards:
HAMZA SHAHID
ā03-13-2018 01:32 AM
ā03-13-2018 05:04 AM - edited ā03-13-2018 05:05 AM
hmm ok so i think tftp server will be an easy option for that what do u say? , i just want to go with an easy way so if it is easy (tftp) then tell me how to make it all
like i setup vlan 2 and given ip to its interface whcih is 10.5.5.5 255.255.255.0 and on other side i use ip as a host 10.5.5.6 255.255.255.0 and make it tftp server
then what commands will i use to get that bin file from tftp server and then with what command how will i install or update my switch image.
Thanks,
Best Regards:
HAMZA SHAHID
ā03-13-2018 05:10 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide