04-14-2015 09:42 PM - edited 03-07-2019 11:33 PM
Dear Experts,
I'm going to try configure on how to telnet to Edge switch but still no result. My Network topology is below:
- 1 Core Switch 3560
- 3 Edge Switch 2960
I'm configured 4 VLAN:
+ Vlan 19: 10.19.10.0/24
+ Vlan 20: 10.20.10.0/24
+ Vlan 21: 10.21.10.0/24
+ Vlan 22: 10.22.10.0/24
On each Vlan, I was assigned Vlan interface IP.
I'm using VTP mode (Server and client) to trunking VLAN and Core SW is standing a VTP Server. I can telnet to Core SW using VLAN Interface IP.
The question is how can I configure to telnet to Edge SW?
Has somebody help me on this?
Thanks in advance!
JH
Solved! Go to Solution.
04-15-2015 01:39 PM
Are you missing an ip default-gateway command on the switches?
04-15-2015 07:05 AM
Hi,
From looking at your topology, the configuration should work. You should be able to telnet into the edge switches from anywhere in the network using the ip addresses of the vlan interfaces on each switch.
What exactly is the issue you're experiencing?
Are you able to ping the switch ip addresses?
Looking forward to hearing from you
04-15-2015 01:39 PM
Are you missing an ip default-gateway command on the switches?
04-15-2015 06:23 PM
Yeah, I missed the default-gateway on each Edge Switch. Now everything fine. Thanks your quick support
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide