HSRP Default decrement value

[bapatsubodh]

Hi,

In HSRP configuration follwoing commands are configured in priority reference.

standby 1 priority 150

standby 1 track serial 0/0

standby 1 preempt

No decrement value is put in tracking command, what is the default value by which router will decrement the priority of the group.

Please share the experience any corresponding link on cisco.com.

Thanks in advance.

Subodh

[carl_townshend]

I believe the decrement value by default is 10, so if prob to best to leave it as it is as your priority of 150 is high enough, default priority is 100

cheers

[Giuseppe Larosa]

Hello Bapat,

Carl is right default decrement is 10 so the priority is lowered to 140 when the serial0/0 fails.

This can be not enough to have the other router to take over.

see

http://www.cisco.com/en/US/docs/ios/ipapp/command/reference/iap_s3.html#wp1078788

Hope to help

Giuseppe

[kakatiya]

so it is better for him to configure a decrement vlaue of 60 along with track interface command ?