HSRP Tracking Unable to create on 4510 SUP 8-E

[roycemathew]

hi All, Have a strange issue with one of my WS-C4510R+E. Unable to create a track object for HSRP tracking.

IOS: cat4500es8-universalk9.SPA.03.03.02.XO.151-1.XO2.bin,1

SUP: WS-X45-SUP8-E

Switch(config-if)#standby 8 track gigabitEthernet 2/1 10
% Interface may already be tracked via tracking command

Switch(config)#trac?
% Unrecognized command

Can someone help with me here.

[Ganesh Hariharan]

Hi,

Check out the below link on 4500 SUP8E for SLA tracking support.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_29983-01.html

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/product_bulletin_c25_468227.html

Hope that Helps..

-GI

Rate of that Helps

[roycemathew]

All section for IPBase says YES.

The License level is matching and supports FHRP, don't know why its not allowing me to configure track object.

[Ganesh Hariharan]

Hi,

Are you sure no tracking configuration is already configured on switch.

It is strange with IP base licence level it should support enhanced tracking configuration.

--GI