05-31-2018 11:29 AM - edited 03-08-2019 03:12 PM
Hello,
I have the following topology.
* I need to configure HSRP to allow redundacy in the network from my two ISP providers.
I just thinking do a vlan for my two isp and use the swich to make the hsrp for thar vlans. I have an isp router that is not management (not cisco) and other isp that is cisco and management.
Any advirse?
Thanks,
06-03-2018 09:06 PM
Still not working.
on my sw-1, I put this:
interface Vlan209
mac-address 00d0.bacc.1201
ip address 190.191.209.2 255.255.255.240
standby 1 ip 190.191.209.30
standby 1 priority 200
standby 1 preempt
standby 1 track FastEthernet0/1
!
track the fa0/1 because is the interface that could be down.
on my sw-2:
interface Vlan209
mac-address 0002.165b.5101
ip address 190.191.209.3 255.255.255.240
standby 1 ip 190.191.209.30
standby 1 priority 150
standby 1 preempt
standby 1 track FastEthernet0/1
06-04-2018 09:51 AM
Any help?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide