cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
262
Views
0
Helpful
1
Replies

i need some help configuring a cisco 2960 from wagon wheel to daisy chain configuration.

brent.anderson1
Level 1
Level 1

i need some help configuring a cisco 2960 from wagon wheel to daisy chain configuration. I will be daisy chaining two switches together via SFP SW MM module. this for a video streaming system.

Here is the original switch configuration:

enable

conf t

username tothomas privilege 15 password fastrouter

username rsmith priv 15 password fastrouter

username admin priv 15 password iptvrocks

!

aaa new-model

aaa authentication login default local

aaa authorization exec default local

aaa authorization network default local

!

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

enable secret fastrouter

!

clock timezone EST -5

clock summer-time EST recurring

!

snmp-server community 8zktIP RO

snmp-server location xxxxxxxxxxxx

snmp-server contact xxxxxxxxxxxxxx

!

no ip domain-lookup

no ip http server

!

banner motd ^

Warning!!! This system is solely for the use of authorized users

and only for official purposes. Users must have express written

permission to access this system. You have no expectation of privacy

in its use and to ensure that the system is functioning properly,

individuals using this system are subject to having their activities

monitored and recorded at all times. Use of this system evidences an

express consent to such monitoring and agreement that if such

monitoring reveals evidence of possible abuse or criminal activity

the results of such monitoring will be supplied to the appropriate

officials to be prosecuted to the fullest extent of both civil and

criminal law!

^

alias configure c alias configure

alias configure e alias exec

alias exec ib sh ip int brie

alias exec srb sh run | beg

alias exec sir sh ip route

alias exec t conf t

alias exec ir show ip route

alias exec s show run

alias exec c conf t

alias exec i sho ip route

alias exec cdp show cdp neighbors

HC-remote-switch-config.txt[6/3/2014 1:56:41 PM]

alias exec ntp show ntp associations

!

line con 0

exec-timeout 60 0

password torrent

logging synchronous

login

line vty 0 15

exec-timeout 60 0

logging synchronous

password torrent

login

!

ip igmp snooping

!

vlan 10

name IPTV

!

ip default-gateway 10.10.10.1

!

ip host core 10.10.10.1

ip host sw4 10.10.10.4

!

interface Vlan10

description CORE VLAN FOR IPTV [do not change]

ip address 10.10.10.x 255.255.255.0

no shut

!

interface range g1/0/1-50

desc UPLINK TO SET TOP BOX [alter with care]

switchport access vlan 10

!

hostname SWxx-DECKSWITCH

! X = switch number from cad drawing

end

wr mem

1 Reply 1

Philip D'Ath
VIP Alumni
VIP Alumni

On ports going to other switches use the command:

macro apply cisco-switch

This will apply all the required configuration (including QoS).  I would also add in:

spanning-tree mode rapid
Review Cisco Networking for a $25 gift card