cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
283
Views
0
Helpful
0
Replies
jayage
Beginner

IE-1000 no routing / no dot1X

Hi there!

 

We bought several IE1000-4PS2 as we have made good experiences 2 or 3 years ago in a small field try. Unfortunately we lately recognized the GUI only configure options. These are very limited and handy. conf t is not available. At the moment we run latest version (ie1000-universalk9 1.8.2) and we do have RADIUS and Tacacs+ setting. As the switch resides at another location than our ISE nodes we need default-gw / ip routing functionality to get 802.1X working.

 

Any ideas on how to resolve this? Static route would be preferred.

 

On another thread I read that earlier versions (1.6) are not compatible with ISE but on cisco.com at features and benefits the following is listed: "Security: secure access; port-security; TACACS+ and RADIUS AAA Client: Security protocols to control access into networks".

Did someone out there get it working with ISE?

 

Thanks

Jay

0 REPLIES 0