IE-3300-8P2S Power per Port

[jmarczuk]

Can anyone confirm which type of PoE the IE-3300-8P2S network switch can support? Is it 802.3bt Type 4? 

[Flavio Miranda]

@jmarczuk 

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-ie3300-rugged-series/catalyst-ie3300-rugged-series-ds.html

High-density industrial Power over Ethernet (PoE)

●  Supports ◦    up to 24x PoE/PoE+ ports or 4x 802.3bt type 4 ports (with 2.5G expansion module) with the all GE PoE enabled base [Power budget - 360W] ◦    up to 24x PoE/PoE+ ports or 8x "802.3bt type 3" ports or 4x "802.3bt type 4" ports with the 10G, PoE enabled system [Power budget – 480Watts]

[jmarczuk]

Thank you!! Are any of the ports capable of Type 4 PoE then, but you can just use 4 of them to not exceed the power budget? Or are certain ones only capable of Type 4 and they would be labelled on the switch?

[jmarczuk]

Or do you need a certain expansion module that has the Type 4 ports?

[Flavio Miranda]

Expantion module is required

The Cisco Catalyst IE3300 Rugged Series delivers power over Ethernet (PoE) over up to 24 ports (with expansion module) to easily connect and power end devices such as IP cameras, phones, wireless access points, sensors, and more"

[Joshqun Ismayilov]

@jmarczuk  

The Cisco IE-3300-8P2S switch supports PoE and PoE+ but does not support 802.3bt Type 4 (which provides up to 90W per port). The maximum PoE power budget for this switch is 360W with expansion modules. If you need 802.3bt Type 4 support, you may want to consider the IE-3300-8U2X model, which provides 4PPoE (802.3bt Type 4) support with up to 60W per port

Link : https://www.cisco.com/c/en/us/products/switches/catalyst-ie3300-rugged-series/datasheet-listing.html

Thanks!