implement qos on a cisco 3560 switch

[gscalia01]

Please help!!!

I have a 3560-48 switch running Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(44)SE3 and i need to implement basic QOS commands to the fast Ethernet interfaces as well as the gig  interfaces and Also I need to create port channels on the switch and need what the port channel syntax are as well for that particular IOS version? 

I have only read only access and i can't see what the QOS and Port channels syntax should be for that IOS version.

Any help would be greatly appreciated.

Thanks in advance.

Jack

[Alexander Maroukian]

Hi Jack,

Following is the configuration guide for 3560 QoS there you can aloso find other information you need about commands.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swqos.html

You will need admin level to configure the switch.

*Please rate helpful answers.

Best regards,

Alex

[gscalia01]

Thanks for the quick response.

-- Sent from my Palm Pre on Verizon Wireless

[Alexander Maroukian]

I am happy to help you.

Please rate helpful posts.

Best regards,

Alex