03-28-2013 10:53 AM - edited 03-07-2019 12:31 PM
Guys, has anyone seen this before? Configuring QoS I use names ACLs, but when I show the class map, it refers to a number rather than name:
conf t
ip access-list extended QoS-CGP
permit tcp any any eq 2598
ip access-list extended QoS-MOVI-Data
permit tcp any range 21000 21900 any
permit tcp any any range 21000 21900
! Class Maps
Class-map match-any QoS-AF41
Match acce name QoS-MOVI-Data
Class-map match-any QoS-AF31
Match acce name QoS-CGP
sh run | beg ss-ma
class-map match-any QoS-AF41
match access-group name 825372979
class-map match-any QoS-AF31
match access-group name 825372979
It is on a 2960 running a rather old IOS - 12.2(25)SEE4
Thanks,
Paul.
03-29-2013 03:59 AM
Hello Paul,
I would suggest to use numbered ACLs and remark command because that IOS release is quite old.
Hope to help
Giuseppe
03-29-2013 04:27 AM
Was there any SW upgrade? Looks like you're hitting CSCsk25171
Don't worry about the 3750 mention, it could well affect 2960 too.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: