Inter vlan routing with L3 switch & Seperate windows DHCP server to give Ip?

[vasanth77]

Below i have attached one Cisco packet Tracer topology,in that i did inter vlan routing with L3 switch SVI by assigning ip to vlan's in L3 switch.Also i put a DHCP server configured with 3 pool to give ip for vlan1,vlan 2,vlan 3?but i m getting dhcp ip for vlan 1 only,but i m also able to ping 10.0.0.3(DHCP server ip) from vlan2,vlan3.

can any body tell how to get ip address from the server for all vlan from a server located in vlan 1 only.But the server NIC supports for vlan too.is it possible to get ip for multiple vlan?

below the setup is

[devils_advocate]

Did you put a helper address on the L3 SVI interfaces on the L3 switch?

!
interface vlan 2
ip helper-address 10.0.0.3
!
interface vlan 3
ip helper-address 10.0.0.3
!

As the DHCP server has an address in Vlan 1 (10.0.0.3), the VLAN1 SVI doesn't need a helper address. All other VLANs/Subnets which need a DHCP address will need a helper address on their SVI.

[vasanth77]

if i changed the native vlan to vlan 10?what would happen?

that time too not needt to mention ip helper address for vlan 1 or vlan 10?