11-28-2008 02:23 PM - edited 03-06-2019 02:43 AM
Hi,
I've search for ages to find an IOS for my Cisco 2620 router that has 48mb and can support the feature "ip http secure-server" is there an easy way to find this?
It seems the SDM gui tool needs this feature to work. My other Cisco 2620 has 96mb and has a bigger IOS but it can run that feature I mentioned and run the SDM tool.
Is there a IOS or do I need more memory?
11-28-2008 03:21 PM
Hi There,
Features are IOS Dependent. & Each IOS version has its Minimum Requirements in terms of DRAM & FLASH.
For Your knowledge sake, we can Choose the IOS as per our Requirements using Cisco Feature Navigator @ http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
However, we need a CCO ID to access it.
In any case, I'd appreciate If you can provide "sh version" from both Routers , so that I can Provide the Exact Solution.
Thanks
11-29-2008 12:17 AM
Hi, router b is fine and has 64mb (thought it was 96mb).
router a has 48mb, the SDM express installs onto router b but not router a. Both routers are C2620's.
The only parts I can't add to router a's config which I think are needed are "ip http secure-server" "transport input telnet ssh"
Router b
sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 17-Mar-08 15:23 by dchih
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
RouterB uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s3-mz.123-26.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco 2620 (MPC860) processor (revision 0x200) with 61440K/4096K bytes of memory.
Processor board ID ******* (1277056474)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
router a
RouterA#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(46a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Wed 11-Jul-07 20:22 by pwade
Image text-base: 0x8000808C, data-base: 0x812D9374
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
RouterA uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s-mz.122-46a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco 2620 (MPC860) processor (revision 0x200) with 45056K/4096K bytes of memory.
Processor board ID ******** (3902584544)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
11-29-2008 12:01 PM
On Router a, we have 64 Mb RAM
On Router b, we have 48 Mb RAM
The Features HTTP Server & HTTP with SSL are Supported in 12.3 Line of Code & the min. requirements I found were 64 Mb RAM.
So I am afraid that a RAM Upgrade is required as I didnt find any IOS (with Required features) & 48 Mb RAM Combination.
I'd appreciate if you can have a Look @ Cisco feature Navigator yourself to try various Permutations & Combinations as Desired
Thanks & regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide