cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
202
Views
0
Helpful
1
Replies
Highlighted
Beginner

IOS for QOS commands and IP Routing

Hi Everyone,

I am having a 4503 chassis with SUP6L-E and using this as my core device in network. I want to use full IP Routing with EIGRP and also want to use auto qos and mls qos. Below are the commands i want to use as per client requirement. Please suggest the appropriate IOS.

qos dbl

qos map dscp 0 to tx-queue 2

qos map dscp 16 18 20 22 24 26 28 30 to tx-queue 4

qos map dscp 32 34 36 38 to tx-queue 4

qos map cos 5 to dscp 46

!

interface TenGigabitEthernet1/1

description *** Trunk to CORE-2 ***

switchport trunk encapsulation dot1q

switchport mode trunk

qos trust dscp

service-policy output DBL

tx-queue 3

priority high

shape percent 30

channel-group 1 mode on

!

Thanks & Regards,

Shaheen Sidana

1 REPLY 1
Highlighted
Hall of Fame Expert

  Hi,

If you need full IP routing, you need the Enterprise license.  IP base supports only EIGRP Stub.

have a look at tthis link for more info:

https://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/at_a_glance_c45-619755.pdf

HTH

Content for Community-Ad