02-28-2023 06:10 PM
Dear Experts,
Had been search in the community and saw the reply that not big different for IOS vs IOS XE.
I got not much experience on switch, our company is going to migrate C2960x (IOS 15.2(7) E2) lan base license to C9300L (IOS-XE) Network Advantage license.
Those old switches are only L2 in our network and we only use some common basic feature such as port-channel, ACL, STP, stack switch.
We got distributor vendor help for the migration and I pass startup config to them to convert into IOS-XE
I would like to ask about:
1. any hidden feature/ setting in C2960X has but C9300L has not?
2. "show running-config all " show much more hidden setting which "show running-config" does not has, if I change those non common setting, will those setting shows by "show running-config" ?
Many thanks for your big help!
02-28-2023 06:57 PM
@Kenny CHAN HK wrote:
Those old switches are only L2 in our network and we only use some common basic feature such as port-channel, ACL, STP, stack switch.
2960X is purely a Layer 2 switch (except for some limited Layer 3 function) and the most logical upgrade choice is the Catalyst 1000.
Catalyst 1000 and the Catalyst 2960X runs on IOS.
02-28-2023 07:00 PM
Dear Leo,
Thanks for reply.
Unfortunately, current company already purchased C9300L before I joined and they arrived recently.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide