11-16-2009 10:51 PM - edited 03-06-2019 08:38 AM
Hi,
Has anyone using IOS 12.2(44)SE2 for Catalyst Switches ever notice that "show version" output is strange?
It shows the DRAM usage as "with 0K/12280K bytes of memory." and doesn't show the FLASH at all.
TIA
Dandy
Solved! Go to Solution.
11-21-2009 08:08 PM
Just in case you still interested. The bug ID is CSCsq70343.
Regards,
jerry
11-20-2009 12:15 PM
Hi Dandy.
Don't know for sure, but I believe that I have seen a bug reported regarding this issue, i.e. the IOS version erroneously does not show the right amount of memory.
You could try to upgrade to a newer version of IOS and see if it amkes a difference.
HTH, Ingolf
11-21-2009 10:06 AM
Hi Ingolf,
Thanks for your reply.
I was looking for a bug about this but I can't find one. Anyway, I'm upgrading them soon to avoid more problems.
Best wishes,
Dandy
11-21-2009 02:53 PM
I'm not sure what model your switch is but you can upgrade to 12.2(46) or the 12.2(50) and higher version.
If you upgrade to the 12.2(50) and higher, please don't be alarmed if the first-time-boot process takes twice as long as this IOS will upgrade the bootstrap (one off).
11-21-2009 08:08 PM
Just in case you still interested. The bug ID is CSCsq70343.
Regards,
jerry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide