ip address with port information

[akhanwaterloo]

Hi

I am trying to see

what ports with the IP address its connected to 

I ran show ip int brief but can see only VLAN 1

i have 3 vlans on this 3560 Switch

any help would be appreciated.

Thanks

Asif

[afionda]

I used:

sh mac-address-table address ??-??-??-??-??-??

or just

sh mac-address-table

Vlan    Mac Address       Type        Ports
----    -----------       --------    -----
666  XXXX.XXXX.XXXX    DYNAMIC     Po6

In your case it will show the port, i am aggragating a bunch of switchs that's why it show my port channel.

Hope that helped

[Reza Sharifi]

Hi,

In addition to Adam's comment, you can do a "sh ip arp" to see the IP and MAC address of the connected device and then do a "sh mac-address-table" to see what port that IP/MAC is connected to.

HTH

Reza

[Ganesh Hariharan]

Hi
I am trying to see
what ports with the IP address its connected to  
I ran show ip int brief but can see only VLAN 1
i have 3 vlans on this 3560 Switch
any help would be appreciated.
Thanks
Asif 

Asif,

As suggested by others try also with command show ip arp and show arp to find the details of the ip and mac with port details.

Hope to Help !!

Ganesh.H

[akhanwaterloo]

Thanks all

When this command is executed

show ip arp

only default vlan1 connected evices shows up

i have two other vlans data and voice they do not show the devices connected

How can i see the devices connected to these two vlans

Thanks

Asif