06-04-2024 05:00 PM
If you add an additional IP helper address to an existing SVI so that the new address is first in the list above the existing helper addresses, do you still need to clear the ip arp on the switch for those IP addresses associated on the SVI?
Solved! Go to Solution.
06-04-2024 05:29 PM
David,
Adding an additional IP helper address to an SVI on a Cisco device primarily affects DHCP traffic forwarding and does not directly impact the ARP protocol or the ARP table on the device. The IP helper addresses are used to forward DHCP Requests received on the L3 interface to the specified remote DHCP servers, allowing clients on a subnet configured on the SVI to receive DHCP services from servers not located on that same subnet. This essentially acts as a DHCP Relay. In short, configuring a new IP helper address above the existing ones does not generally necessitate clearing the ARP table. Are you seeing any behaviors or symptoms that lead you to think otherwise? Happy to help.
I hope that helps!
06-04-2024 05:20 PM
https://community.cisco.com/t5/discusiones-general/%F0%9D%94%B8-%F0%9D%94%B8-how-do-i-get-a-human-at-%F0%9D%94%B8merica%F0%9D%95%9F-%F0%9D%94%B8%F0%9D%95%9A%F0%9D%95%A3lines-immediately-us/m-p/5125357#M29271 https://community.cisco.com/t5/discusiones-general/aa-ask-how-do-i-get-a-human-at-%F0%9D%94%B8merica%F0%9D%95%9F-%F0%9D%94%B8irli%F0%9D%95%9Fes-immediately-us/m-p/5125372#M29281
https://community.cisco.com/t5/discusiones-general/usa-%EF%B8%8F-how-do-i-speak-to-american-customer-service-fast-response/m-p/5125378#M29285
https://community.cisco.com/t5/discusiones-general/%EF%B8%8F-ask-how-do-i-speak-to-american-customer-service-google-rank/m-p/5125389#M29290 https://community.cisco.com/t5/discusiones-general/get-%EF%B8%8Fcontact-how-do-i-speak-to-american-customer-service-usa-tr/m-p/5125401#M29294
https://community.cisco.com/t5/discusiones-general/%EF%B8%8F-ask-how-do-i-get-a-human-at-american-%F0%9D%90%80%F0%9D%90%A2%F0%9D%90%ABlines-immediately-aa/m-p/5125404#M29295
https://community.cisco.com/t5/discusiones-general/a-quot-a-how-do-i-get-a-human-at-%F0%9D%94%B8merica%F0%9D%95%9F-%F0%9D%94%B8%F0%9D%95%9A%F0%9D%95%A3lines-immediately/m-p/5125368#M29279 https://community.cisco.com/t5/discusiones-general/a-a-how-do-i-get-a-human-at-%F0%9D%94%B8merica%F0%9D%95%9F-%F0%9D%94%B8irli%F0%9D%95%9Fes-immediately-24x7/m-p/5125374#M29282
https://community.cisco.com/t5/discusiones-general/%EF%B8%8F-ask-how-do-i-speak-to-american-customer-service-quick-support/m-p/5125387#M29289 https://community.cisco.com/t5/discusiones-general/%EF%B8%8F-call-how-do-i-speak-to-american-customer-service-get-fast-rep/m-p/5125395#M29293
https://community.cisco.com/t5/discusiones-general/%EF%B8%8F-ask-how-do-i-speak-to-american-customer-service-quick-talk/m-p/5125385#M29288 https://community.cisco.com/t5/discusiones-general/%EF%B8%8F-call-how-do-i-speak-to-american-customer-service-google-post/m-p/5125392#M29292
https://community.cisco.com/t5/discusiones-general/%EF%B8%8F-ask-how-do-i-speak-to-american-customer-service-quick-response/m-p/5125382#M29287 https://community.cisco.com/t5/discusiones-general/usa-%EF%B8%8F-how-do-i-speak-to-american-customer-service-quick-response/m-p/5125380#M29286
https://community.cisco.com/t5/discusiones-general/call-how-do-i-get-a-human-at-%F0%9D%94%B8merica%F0%9D%95%9F-%F0%9D%94%B8%F0%9D%95%9A%F0%9D%95%A3lines-immediately-us/m-p/5125362#M29275 https://community.cisco.com/t5/discusiones-general/aa-how-do-i-get-a-human-at-%F0%9D%94%B8merica%F0%9D%95%9F-%F0%9D%94%B8%F0%9D%95%9A%F0%9D%95%A3lines-immediately-us/m-p/5125369#M29280
https://community.cisco.com/t5/discusiones-general/usa-%EF%B8%8F-how-do-i-speak-to-american-customer-service-immidiate-aa/m-p/5125376#M29284
06-04-2024 05:29 PM
David,
Adding an additional IP helper address to an SVI on a Cisco device primarily affects DHCP traffic forwarding and does not directly impact the ARP protocol or the ARP table on the device. The IP helper addresses are used to forward DHCP Requests received on the L3 interface to the specified remote DHCP servers, allowing clients on a subnet configured on the SVI to receive DHCP services from servers not located on that same subnet. This essentially acts as a DHCP Relay. In short, configuring a new IP helper address above the existing ones does not generally necessitate clearing the ARP table. Are you seeing any behaviors or symptoms that lead you to think otherwise? Happy to help.
I hope that helps!
06-04-2024 05:35 PM
No. Another engineer and I were having a discussing and he mentioned about clearing the IP ARP cache. I thought it wasn't necessary but I just was not too sure. Both DHCP server IP addresses are Windows DHCP servers that replicate with one another and our DHCP admin stated that the new DHCP server already has the endpoints showing in the various DHCP pools. So it looks like that was an easy one.
06-04-2024 09:08 PM
If you add two ip helper
The SW will send dhcp request to both IP helper whatever it top or button config.
And so arp have no issue here
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide