IPv6 Stateless DHCP on 3750

[Antonio Knox]

Is it possible to configure stateless IPv6 on a 3750? I've tried to but I can't. I can't configure an IPv6 DHCP pool to reference. Is it an IOS version issue? I'm running 12.2(35)SE5

[padramas]

Hello Antonio,

Can you make sure that you have changed the SDM template to support IPv6 stack ?

to change SDM template

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swsdm.html#wp1140558

For IPv6 Stateless Autoconfiguration

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swipv6.html#wp1216604

HTH

Padmanabhan

[Antonio Knox]

I've been using the 'sdm prefer dual-ipv4-and-ipv6 routing' template. To be a bit clearer, this is what I'm trying to do.

http://www.cisco.com/en/US/docs/ios/12_2t/ipv6/v6_dhcp_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1125846

My problem is, I can't configure 'ipv6 dhcp pool poolname'. I'm thinking that this is an IOS version issue, but I wanted to know if anyone else has run into this issue. Again, I'm running 12.2(35)SE5

[Antonio Knox]

I get the feeling that neither the 'ipv6 dhcp pool poolname' or any 'ipv6 dhcp' commands can be used on the 3750. So, instead, does anyone know of a way besides using a ipv6 pool to assign DNS server addresses to client PC's?