cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
23273
Views
5
Helpful
4
Replies

Is there a way to graceful power off the nexus 7000?

Hele Du
Level 1
Level 1

Hi all,

 

There is a electric power maintenance windows  for our DC, so I need graceful shutdown all devices.

 

Is there a correct way to shutdown the nexus 7000? I also have ASA and FI in our DC.

1 Accepted Solution

Accepted Solutions

Mark Malone
VIP Alumni
VIP Alumni

Hi

no its a switch so it just needs to be disconnected here is a guide explaining it

The ASA should have a power switch at the back you could power it off first

Save all configs first

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_hig_book/n7k_repack.html

View solution in original post

4 Replies 4

Mark Malone
VIP Alumni
VIP Alumni

Hi

no its a switch so it just needs to be disconnected here is a guide explaining it

The ASA should have a power switch at the back you could power it off first

Save all configs first

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_hig_book/n7k_repack.html

Hi Mark,

 

You are right, the only way to shutdown the switch is turning off the power.

 

I think maybe "poweroff module X" will work if turning module first but it is same to using power switch.

Poweroff Module x =:- will power off the module but not switch.

But there is no command to poweroff the chasiss.

you need to either do the power switch off or remove the cable from power socket.

Hello InayathUlla Sharieff,

 

Please verify if the Cisco Nexus 7000 can be remotely powered off.

Thanks.

 

Bob Mara

 

Poweroff Module x =:- will power off the module but not switch.

But there is no command to poweroff the chasiss.

you need to either do the power switch off or remove the cable from power socket.

Review Cisco Networking for a $25 gift card