is WS-C2960-48PST-L and WS-C2960+48PST-L different ?

[tangbuiquoc]

Hi all,

I am about to upgrade the our Lan switches WS-C2960+48PST-L to latest released but I notice our other switches showed WS-C2960-48PST-L . Does these switch use the same IOS or different ? are they the same or different model ?

I got confuse about "+"/"-" when run show version 

Any view on latest release of WS-C2960+48PST-L ?

Many thanks

[Mark Malone · Accepted solution]

hey download them form the correct section there's a section for 2960plus versions and non plus section , see link below shows all options to download in 2960 models

https://software.cisco.com/download/navigator.html?mdfid=279935165

https://software.cisco.com/download/release.html?mdfid=284776528&flowid=42768&softwareid=280805680&release=15.2.2E6&relind=AVAILABLE&rellifecycle=MD&reltype=latest

[tangbuiquoc]

Hi Mark,

Thanks very much for your quickly support. Yes, i noticed WS-C2960+48PST-L is PLUS now... so i will download the plus (+) IOS

Cheers

Tang

[Mark Malone]

yes its always best to follow the correct path , if you chanced it,  it may probably work but best not to risk it or you may have to go through it all again if it fails to boot....